Tilt Sensor (Part 8)

Part 123456789

We have now covered most of the required functions to build a state of the art tiltmeter. Some additional general purpose libraries are necessary to build a stand alone device: PlainLCD (LCD driver), PlainENC (Encoder dirver) in addition to the standard math and EEPROM libraries. Please check this page if you are interested in PlainXXX libraries and MicroTLT.

Here is an example of use: MicroTLT is loaded in my multi purpose Arduino enclosure. The sensor is capable of sensing tilt angles as low as the one formed by the thickness of a piece of paper.

 

Next post on same subject

Leave a Reply

You must be logged in to post a comment.