Connecting AVRISP to Arduino (Part 3)

Part 123, 4

After following the described procedure you get this boring stupid message: “avrdude: usbdev_open(): did not find any USB device “usb””

 

What the hell is this?

Wrong driver! For some obscure reasons, the default driver installed by Windows (in my case XP Pro version) will not work! The good news, is that there is a solution! Follow this procedure:

In the system manager, locate the Jungo driver

 

Remove the driver

 

Download a working version of libusb0.dll from here and copy the zip file in the C:\Program Files\arduino-1.0.1\hardware\tools\avr\utils\libusb\bin directoy. Change the original dll file extension and unzip the downloaded file in this directory

Unplug and replug your AvrISP mkII programer in order to get this familar window

 

Chose manual installation

 

Tell Windows that you will specify the place and the location of the driver

 

Locate the source file (The one you downloaded before)

 

On successful completion of the installation, you will get this window

 

And now you will get this from the system manager window

 

Burning the bootloader will now work like a charm

 

And gently blink the PINB5 led after this message shows up

 

Epilogue

If you are running Atmel Studio, you must switch back to the default USB driver. Go to the system manager, in the Atmel USB devices, deinstall the AVRISP MKII driver. Search for new devices, and leave windows install the default one. Naughty but effective!

HTH

 

 

 

 

 

Leave a Reply

You must be logged in to post a comment.