Archive for September 2017

PLD (Part 6)

Part 1, 2, 3, 4, 5, 6 The PLD features a multipurpose connector mainly dedicated to plugging sensors. This video shows how easy it is to configure a PLD an run an application for  monitoring temperatures. Back us on Kikstarter … Do you want to know more about HL2, HL2 Panorama and HL2 PLD ? Check this video Thanks for watching

PLD (Part 5)

Part 1, 2, 3, 4, 5, 6 HL2 PLD may be used for safety applications too. In this configuration, the PLD is able to detect movements up to 7 m away within and almost 90° view angle. It features a PIR (Passive Infra Red) sensor from Panasonic. This sensors is available in different sizes depending on the required range; the enclosures […]

3D Printing (Part 12)

Part 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 3D printing can be tiring for the nerves… For a week or so, I was enable to print full size parts without enduring severe problems such as splitting layers, irregular faces and even gaps. Here is an illustration of the prints before the fix (on top) and after the fix. The first layers […]

PLD (Part 4)

Part 1, 2, 3, 4, 5, 6 Using the HL2 PLD (Place and Leave Device) is easy and usefull. We ran the earliest tests on… soil moisture. The reason why we chose this one is that I have always liked to have a green plant in my office and this one might last longer than the others. Because it is fitted […]

PLD (Part 3)

Part 1, 2, 3, 4, 5, 6 The name PLD stands for “Place and Leave Device”. The original design is big enough to encapsulate its power reserve, the radio module, an arduino ™ microcontroller which will run your own code, and connectors for programming, debugging or plugging sensors. The radio module features the HL2 stack which handles data in terms of […]

PLD (Part 2)

Part 1, 2, 3, 4, 5, 6 Tadaaa ! This PL…D day Simple and flexible #IoT is here! Check out our new #Kickstarter campaign: https://goo.gl/aY8NG4  #LPWAN #Sigfox #LoRaWAN Next post on same subject

PLD (Part 1)

Part 1, 2, 3, 4, 5, 6 Dear arduinoos followers, You may wonder why the production line of arduinoos went to a stall along the last weeks… Holidays ? Well it sounds reasonable and logical, however except for a few days of leave here and there (actually in Lyon, Annecy, Saint Martin des Baleines and Val-Andre) during summer time this is not […]