Archive for December 2018

3D Printing (Part 14)

Part 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 The heating plate is made of two symmetric printed conductive layers ~1.5 Ohm each. As printed on the heating plate you may wire them for use with 12 V or 24 V power supplies. As we need to add an extra power supply the choice for a 24 V power supply is […]

3D Printing (Part 13)

Part 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 Many PLA rolls were fused in my Welleman k8400. So far, it has been a good servant in spite of few breakdowns, mainly due to clogged nozzle or improper adjustments. Careful cleaning and fine tuning solved all  these problems except one which is my fault. As I was taking apart the fusing […]