Archive for the ‘Acoustics’ Category

FN-M16P (Part 2)

Part 1, 2 As seen in the previous post, the MCU (e.g. arduino) and the module are talking each other through a serial communication (UART) at a quite modest rate of 9600 baud. Data is exchanged as packets of 10 bytes according to the following structure: Byte# Function Value Comments 0 Start Byte 0x7E constant 1 […]

Random number generator (Part 2)

Part 1, 2, 3 Here is a noisy signal sampled at 100 kHz with an Arduino UNO. The signal has 8 bits of resolution and the divider bridge of the final amplifying stage has been set so that the ADC range matches (without exceeding) the input signal range. Here is the illustration of a vector of 1024 […]

Ultrasonic scanner (Part 2)

Part 1, 2 Most of the electronic diagram shown here should look familiar to the readers of arduinoos posts. The ultrasonic sensor is added to what was described as the test bench for stepper motors. Here is the list of the required components: An Arduino UNO baord (Should I introduce it to you ?) A […]

Ultrasonic scanner (Part 1)

Part 1, 2 And now, something completely different : here is arduinoos’s ultrasonic scanner ! This ultrasonic scanner results from the combination of two main components: an ultrasonic sensor and a stepper motor. Both have already been covered in this blog (here and there). Both component form the head of the scanner which is screwed on top […]

Web site of the day

Music has always been part of my life. And the means to listen to music has been a long way. From the 3 transistors amplifier taken from a broken toy record player to the A&R Cambridge amplifier. From the early shoe box home made speaker covered with wood looking adhesive up to the Magneplanar speakers. So that […]