Part 1, 2, 3 Once the hardware is ready, let’s have a look at the data and the software used to read these data. The customer information can operate in two different modes: historic: for compatibility reasons with older meters, this is the default mode. standard: this new mode, available from the latest Linky meters. […]
Part 1, 2, 3, 4, 5, 6 The PLD features a multipurpose connector mainly dedicated to plugging sensors. This video shows how easy it is to configure a PLD an run an application for monitoring temperatures. Back us on Kikstarter … Do you want to know more about HL2, HL2 Panorama and HL2 PLD ? Check this video Thanks for watching
Part 1, 2, 3, 4, 5, 6 HL2 PLD may be used for safety applications too. In this configuration, the PLD is able to detect movements up to 7 m away within and almost 90° view angle. It features a PIR (Passive Infra Red) sensor from Panasonic. This sensors is available in different sizes depending on the required range; the enclosures […]
Part 1, 2, 3, 4, 5, 6 Using the HL2 PLD (Place and Leave Device) is easy and usefull. We ran the earliest tests on… soil moisture. The reason why we chose this one is that I have always liked to have a green plant in my office and this one might last longer than the others. Because it is fitted […]
Part 1, 2, 3, 4, 5, 6 The name PLD stands for “Place and Leave Device”. The original design is big enough to encapsulate its power reserve, the radio module, an arduino ™ microcontroller which will run your own code, and connectors for programming, debugging or plugging sensors. The radio module features the HL2 stack which handles data in terms of […]
Part 1, 2, 3, 4, 5, 6 Tadaaa ! This PL…D day Simple and flexible #IoT is here! Check out our new #Kickstarter campaign: https://goo.gl/aY8NG4 #LPWAN #Sigfox #LoRaWAN Next post on same subject
Part 1, 2, 3, 4, 5, 6 Dear arduinoos followers, You may wonder why the production line of arduinoos went to a stall along the last weeks… Holidays ? Well it sounds reasonable and logical, however except for a few days of leave here and there (actually in Lyon, Annecy, Saint Martin des Baleines and Val-Andre) during summer time this is not […]
Previous T&T Building a tracking device is no big deal for the Arduino enthusiasts. All you need is an Arduino board (e.g. a UNO), a GPS shield and a GSM shield. Too bad, we have a problem here because of the pin-out of the shields. The GSM shield uses pin 2 and 3 for the Rx and […]